Alligator shears for metal recycling companies, scrap factories, smelting foundry business to various shapes of steel and metal structures for cold cut
(1) hydraulic drive, easy operation and simple maintenance.
(2) Working blade length: 400mm, 600mm700mm800mm1000mm1200mm, shear force from 63-400 tons a total of eight levels. 700mm or more blade shearing machine, especially for cutting scrap cars.
(3) Installation without foot screws, no power supply available diesel-powered place.
(4) equipment with hydraulic drive, compared with mechanical transmission-type cutting machine, small size, light weight, small inertia, low noise, smooth operation, easy to operate, flexible, cut a large cross-section, scissors mouth and easy to adjust, use of safe, easy to implement overload protection.
Safety rules
1. Equipment should be people operate, others may not be free to use without training.
2. Before driving should check all parts are normal, fasteners are secure.
3. Prohibition shear unannealed steel, cast iron, soft metal parts, too thin, the workpiece is less than 100 mm in length, and more than the length of the workpiece scissors.
4. In operation, the body of the device are not allowed close to the edge and transmission parts, and should pay attention to the safety of those around them, to prevent the material tilt wounding. Cut material should try to close the knife cut inside. When cutting short material may not be used hand-held workpiece feed, feed should clamp.
5. Equipment operation, the operator will be allowed to leave their posts when the work is completed or temporarily leaving the job, you should cut off the power, and shall not be repaired or stroking moving parts while the machine is running, do not touch or press the foot inside the bin material.
6: machine lubrication should be required at each class at least once filling oil.
没有评论:
发表评论