Use Flat Rolled Tandem rolling mills?

Tandem rolling mills for wire rod or flat rolling is defined as the lessening of the cross-sectional area of the metal stock, or the common shaping of the metal products, with the use of the rotating rolls. It lets a high degree of closed loop mechanization and very high velocities, and is therefore capable of offering high quality, close tolerance starting material for a variety of secondary sheet metal working procedures at a minimum cost.

Tandem rolling mills for wire rod work contact piece is compacted with a lower roll radius, and this leads to lower torque, power and forces. The four high rolling mills make use of two smaller diameter rolls for contacting the work and two backing rolls at the rear end. Another roll configuration which lets smaller working rolls against the task is the cluster rolling mill.

For attaining higher throughput rates in standard products, a tandem aluminum strip rolling mill is generally used. This configuration comprises of a series of rolling equipments. With every rolling step, work velocity enhances, and the difficulty of synchronizing the roll speeds at every stand is important. Mills should be equipped with all the necessary and required machinery and equipment so that the products formulated by them are of high standard. Not just they should be apt to the standard, but they should be produced in a fashion that every necessary requirement should be fulfilled and possesses all the required features.

We are rolling mills and continuous casting machine manufacturer in China, which the final products are round steel, deformed steel and wire rod.

http://www.geilimachinery.com/products_info/Tandem-rolling-mills-for-wire-rod-319710.html